Product Introduction

AI-6000 Oil Dissipation Factor and Resistivity Meter is used to measure dissipation factor, dielectric constant and resistivity for oil. The set is all-in-one structure, with internal oil cup, temperature control, AC bridge, high resistance meter, AC/DC test voltage and standard capacitor etc.. The set is equipped with full digital technique, full automatic measurement, easy to operate and stable in  performance. Test results are displayed on a large LCD and output with a micro printer.

Product Features

▪ Interference Suppression：
The AI-6000G has advanced interference suppression circuit based on the frequency conversion and digital filter technique, the ratio of interference current to specimen current is 2:1(200%).

▪ High Accuracy：
Normally the accuracy of dissipation factor under no-interference environment is better than 0.00010.

▪ Safe Protection：
Output Protection, Input Protection, Poor Grounded Protection, CVT, Fault Protection, No voltage overshoot, Pulse hint, etc

▪ Multiple Functions：
a)Basic test modes.
b)Use an external power supply.
c)Test at more higher voltage.
d)All test work will be done automatically after start the set.

Technical Parameter

Accuracy	C: ±( reading×1% )( dielectric constant ε is auto converted )
	DF: ±( reading×1% + 0.0001 )
	R: ±( reading×10% )( resistivity ρ is auto converted )
Temperature	±1°C
Range	C: 8pF ~ 160pF, resolution 0.001pF
	DF: no limit, resolution 0.001%
	R: 2MΩ ~ 2TΩ
Controlled Cup Temperature Range	50 ~ 110℃
AC Test Voltage	600V~2000V(RMS), 50 / 60Hz ( crystal timer based )
DC Test Voltage	300V~600V
Cup Parameters	3 electrode, 2mm gap, 10ml volume
Empty Cup capacitance	12.5pF ± 0.5pF
Empty Cup DF	< 0.005%
Heat Mode	2 channel individual for upper/lower electrode
Heating speed	About 15 minute from room temperature to 90℃
Power supply	100V ~ 240VAC 50 / 60Hz 100W
Computer interface	RS232
Internal Printer	M150
Volume and Weight	39.8×18.8×18.0cm 3, 7.5kg
Operating Temperature	-10° C ~ 40° C
Humidity	< 90%